29er agility with fat bike comfort? We're struggling for reasons not to convert to the quick and playful 650b+.
650b+ | Standard hub | QR/Bolt-through compatible | suits semi-fat 2.8" - 3.5" tyres | incompatible with Sonder bikes
When 650b+ first arrived on the scene everyone thought it was just another fad, how wrong they were… Suited to semi-fat 2.8" - 3.5" tyres, Rumpus may be a little on the wide side, but that's not to say it's weighty. With improved traction, low-pressure tyres and reduced weight, not only will you be first to the top, but you'll iron out the rough stuff on the way down too... Read more
45 mm lightweight aluminium rims will get you over those rock gardens and technical terrains. Run with 2.8" - 3.5" tyres, or run tubeless with the help of some 45 mm tape, a pair of valves, and compatible tyres. Disc only.
With tough forged aluminium hub shells and 6 bolt disc mounts, this Love Mud hub is reliable and easy to work on. According to your fancy and your forks, you can run the 100 mm wide front hub with either QR or 15mm end caps. The rear hub can be set up with 135mm QR or a 142mm with a 12 mm thru-axle. QR end caps are not supplied.
Good quality bearings, sealed and protected from dirt and water, let you love mud without sacrificing your hub's health or your own comfort.
We all ride our own way. Choose between a regular Shimano freehub and the SRAM XD Driver (permitting a 10 tooth bottom sprocket) to make the Rumpus your own.Read less
- QR adapters available upon request
Front Wheel Weight: 1208 g Rear Wheel Weight: 1309 g
Love Mud Rumpus Rim
Disc only Tubeless compatible (using 45 mm tubeless tape) Rim weight: 753 g Internal width: 45 mm Rim ERD: 65 mm
Love Mud Front Hub
Forged 6061 aluminium T6 hub shell 6 bolt disc mount OD32 sealed cartridge bearings Weight: 200 g Hole count: 32H PCD: Left: 58 mm; Right: 58 mm Flange to Centre: Left - 23 mm, Right - 33 mm
Love Mud Rear Hub
3 pawl with 30 tooth engagement 6 bolt disc mount Forged 6061 aluminiumT6 hub shell OD30 sealed cartridge bearing—hub OD28 sealed cartridge bearing—freehub Forged 7075 aluminium freehub Interchangeable freehub body (Regular Shimano or SRAM XD) Weight: 300 g Hole count: 32H PCD: Left - 58 mm, Right - 58 mm Flange to Centre: Left: 31.3 mm; Right: 18.8 mm
Plain gauge stainless steel spokes for extra durability Front Length: 275 mm Rear Length: 273/275mm Brass nipples
Author: Guy Kesteven Read More: here
Broad, secure sealing and all weather durability at a bargain price