This is an ex-display bike with some signs of wear and tear from being displayed at our Ambleside store. For more details about the condition of this bike, call our Alpkit Ambleside Store Heroes on 015394 54954.
There's a small paint chip on the rear derailleur.
Ultra-capable 27.5" hardtail - fast, lively and precise. Cut trails like a scalpel. Transmitter flows across cambers, roots, rocks and ruts. Get speed, agility and masses of fun with a long wheelbase, long trail and long reach. Then ask why anyone buys full suspension.
It is important to get the right size bike, if the bike fits it will be faster, more comfortable, and easier to handle. You can also take into consideration the standover height to ensure you pick a bike that will be a good fit. If you measure your inside leg and ensure there is a minimum of an inch from the toptube to your crotch this will give you enough seatpost adjustment to find your optimum saddle height.
Generally we recommend: Small: Riders between 5ft 2in and 5ft 7in Medium: Riders between 5ft 6in and 5ft 10in Large: Riders between 5ft 9in and 6ft 2in X-Large: Riders of 6ft 2in +
|ST - Seat tube||410||440||470||485|
|TT - Top tube||581||603||623||647|
|HT - Head tube||105||115||115||130|
|HA - Head angle||65||65||65||65|
|SA - Seat angle||75||75||75||75|
|CS - Chainstay||425||425||427.5||430|
|BB - BB drop||52||52||52||52|
|FO - Fork offset||46||46||46||46|
|WB - Wheelbase||1144||1169||1191||1220|
|SO - Stand over||750||768||783||796|
|RE - Reach||422||442.5||462.5||482.5|
|SK - Stack||589||598||598||612|
|Weight: S: 2.0kg; M: 2.03kg; L: 2.07kg; XL: 2.1kg|
|Alloy trail frame with integrated tapered headset for a clean, low front end|
|Hand welded 6061-T6 triple butted frameset|
|High-quality extended welds|
|Optimised for 150 mm (540 mm axle to crown) suspension forks|
|Internally routed cables|
|Boost 148 rear spacing to allow huge tyre clearance while benefitting from a stronger wheel|
|Threaded 73 mm BSA BB shell for no-creak assembly|
|Chainstay mounted disc brake for clean lines and damage protection|
|Reverb Stealth port|
|EN 14766 compliant|
|The Transmitter frame is suited to a low profile 2.8” tyre or aggressive 2.6” tyres, some larger 2.8”s may rub the chainstays in use|
Long reach, low bottom bracket and slack 65° head angle for bucket loads of confidence. 425mm short chainstays for agility and insane acceleration out of turns.
Not all tubes are equal. Transmitter uses tube walls of different thicknesses to get material where it is needed and save weight where it isn’t.
Clean lines and tidy cables thanks to fully guided internal routing.
27.5" 2.6/2.8" tyres. Designed around Boost 148/110 standards.
Compatible with a dropper seatpost so even the most sheepish riders can tackle those steep sections head on like a pro. Transmitter can aslo be fitted with a chain guide. (ISCG 05 compatible).
150mm of suspension floats you over the roughest and rootiest lines.